Verizon Treo 755p + TomTom GO 720 = Data
I?ve gotten my TomTom GO 720 to bluetooth pair with my Verizon Treo 755p for voice and data services. I couldn?t have done it without ?DAvidJVC? and his valuable notes posted on TomTomforums.com (
http://tomtomforums.com/showthread.php?t=3342&page=2) ? thanks David! I?m updating his write-up with my own experiences below:
Make sure your phone has bluetooth and you have paid Verizon $15/month to enable the bluetooth dial-up networking (DUN) function in the Treo 755p. I also have a data plan with Verizon, but I don?t think that?s necessary for DUN to work.
1. Turn on the bluetooth settings on your phone, and make the phone discoverable (under ?visibility? select ?visible? or ?temporary?).
2. On the TomTom, go to the menu and select "TomTom Traffic." It will ask you to set up a wireless data connection. Select yes.
3. Before setting up the wireless data connection, follow the prompts to set up the bluetooth link between your phone and your TomTom. There are two ways I?ve done this:
a. Lasting through the entire process, keep an eye on your phone. It will prompt you for the password ?0000? multiple times. If you fail to enter it within a minute or so, the set-up attempt will fail and you'll have to start over. Repeat this process until they pair.
b. One possible way to avoid the multiple password entries, though, is to run the Treo?s bluetooth ?hands-free setup? at the same time that the TomTom starts the pairing process with the Treo. I did this, and they both paired on the first try. If they don?t, then repeat the process until they pair. They CAN eventually pair. The TomTom GO 720 must become a ?trusted device? within the Treo or it will never work right.
4. After bluetooth pairing is complete, the TomTom will attempt to set up the wireless data connection. Choose to set it up manually, and ensure that your Treo?s bluetooth is ?visible? or ?temporary? throughout this section. Here?s the information you will need:
Access point name: vzw3g
Username: mobile#@vzw3g.com (mobile# is your cell phone # without hyphens)
Password: vzw
DHCP: "auto"
DNS: "auto"
Dialup #: ?#777? (replace the *99 that TomTom enters there).
Log on script: leave it blank
If this doesn't work, turn off both devices, then try again. It took me a couple times to establish the link until I made sure that the Treo?s bluetooth was ?visible/temporary? during the process.
Once you have set it up, try to do at least a weather update to make sure you are connected. Once you are connected you can try to upload traffic data. If it fails, call customer support at TomTom, 866-486-6866. They can re-set your user name and password so you will be able to log on. This is where I had to go because I was getting a ?your subscription has expired? message. When I called them they re-set the account. They also asked me if I got error code 1506, which I had been getting. They said this was due to an error in the TomTom TRAFFIC function of the GO 720 in the United States, and they?ll be uploading a patch via TomTom HOME ?sometime soon.? It should fully work then. Having TRAFFIC was so close ? and yet so far! I also asked them for a free trial of TomTom TRAFFIC, and they did so for 90 days.
I?ve noticed that if my Treo?s screen is blank (after 30 seconds of inactivity), then my TomTom won?t connect the DUN. I have to turn on my Treo?s screen and press the center button to unlock the keyboard. It works, at least for getting weather.
Good luck!