How to install an EasyMount (Solution)

Joined
Sep 9, 2007
Messages
43
TomTom Model(s)
TomTom GO 510
Hi All,

Here's how you can install an EasyMount to a clean flat surface: (it seems counter-intuitive and so I thought I'd post it here. I had trouble with it at first, but now it sticks like Spiderman)

- Make sure that the surfaces are clean. A bit of soap and water worked well.
- Pinch the 2 suction tabs TOWARDS the EasyMount dial (YES, this is the counter-intuitive part!)
- Place the mount on the surface and you'll notice that it already seems like it's stuck
- With your other hand, apply pressure and turn the locking dial clockwise (to the right) while the tabs are pinched towards the dial.

VOILA! It should stick there for a while!

Hope that helps someone. I was about to call support for my XL 340s mount and then I figured this out with trial and error.
At first, I tried to hold the tabs down to the mounting surface, but that never worked. The mount didn't stick at all. Then, when I noticed the notches for the tabs on the dial, I thought it would make sense to pinch the tabs together.

Good luck!
 
Last edited:

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Members online

Latest resources

Forum statistics

Threads
29,447
Messages
199,632
Members
68,737
Latest member
Knot

Latest Threads

Back
Top