Car mount for GO6100?

[Albannach]

The plastic sucker on the car mount of my trusty GO6100 has cracked, and the mount no longer is made apparently. (The mounts I’ve seen have pins in a different spot, so won’t accommodate a 6100.)

Can anyone please point me towards a mount that the 6100 will fit into (I can always attack the USB at the back, so doesn’t need to have the pins necessarily.

I miss it, and iPhone directions are not the same.

Thanks.

 

[dhn]

maybe here:

Mount for Tomtom Go 6100 for sale | eBay

Find great deals on eBay for Mount for Tomtom Go 6100. Shop with confidence.

www.ebay.co.uk

 

[Albannach]

maybe here:

Mount for Tomtom Go 6100 for sale | eBay

Find great deals on eBay for Mount for Tomtom Go 6100. Shop with confidence.

www.ebay.co.uk

Thanks, I did have a look on eBay: that repair service is for the holder bit, not the suction cup end, unfortunately.

 

[M.K.W]

Brodit Holder for TomTom GO 6100 | Brodit

Shop Brodit holders for TomTom GO 6100. Car phone holders and Brodit ProClip mounts for cars, vans and trucks from Brodit UK.

www.brodit.co.uk

This has standard AMPS hole pattern. Can be used with any AMPS patterned suction cup holder.

RAM® Twist-Lock™ Suction Cup Double Ball Mount with AMPS Hole Pattern

The RAM-B-166-A-347-DYN1U consists of a short length B-size arm with our 3.3" diameter twist lock suction cup and rectangular base with universal AMPS hole pattern.

rammount.com

Something like this

 

[Albannach]

Brodit Holder for TomTom GO 6100 | Brodit

Shop Brodit holders for TomTom GO 6100. Car phone holders and Brodit ProClip mounts for cars, vans and trucks from Brodit UK.

www.brodit.co.uk

This has standard AMPS hole pattern. Can be used with any AMPS patterned suction cup holder.

RAM® Twist-Lock™ Suction Cup Double Ball Mount with AMPS Hole Pattern

The RAM-B-166-A-347-DYN1U consists of a short length B-size arm with our 3.3" diameter twist lock suction cup and rectangular base with universal AMPS hole pattern.

rammount.com

Something like this

Thanks for that: I just need a thing with a suction cup and the same size of ball to fit into the rest of the mount. Is it a standard diameter (haven't measured)?

See photo attached - its the bit in red needed.

 

[M.K.W]

According to the Brodit website the size of the ball on your mount is 16mm. I’ve checked my Go600 which uses the same mount. 16mm appears to be the correct size. A 17mm would be to big. And unfortunately that is a rare size. Your options are limited.

https://www.amazon.com/LycoGear-Compatible-Discover-Included-MT-G5/dp/B09CWD8SMQ

https://www.amazon.com/Arkon-80mm-Windshield-Suction-Mount/dp/B00J05QHL2/ref=sr_1_17?crid=2EEIWY37STN5A&dib=eyJ2IjoiMSJ9.3ZBlgNRaOj6u5TffXKUbCPt-wWPFRFHJsG36AD6eaUk7dTOYrdk51HLFn0BoGjIYw3-2C-Rbouo7G_fKQTO32C0F4-wm5-apz9Z7kPTME5zN7OMl_LCwSkSbDAjH2JL_-xEyo3GD6UoDoyGqfaZ5Nx0rqNcFtxq9tD89mO4KrWyS5idDNZhAF2AjD4Gln4k7Vz4SAbuOrwMGBNQsmdDZnWeN6vcvPPdDfLTFBH_MKZ4.qWH9mL6ivhZMnUjcdMAR9H4smNQfoerycsMsT6HHMjA&dib_tag=se&keywords=Arkon%2Bamps%2Bwindshield%2Bmount&qid=1725034083&sprefix=arkon%2Bamps%2Bwindshield%2Bmount%2Caps%2C116&sr=8-17&th=1

This second one will work with the Brodit 16mm AMPS adapter. I’ve us both the Ram and Arkon mounts for Phone, GPS, and police scanners and never had any issues.